Upgraded from an older Ride crankset and I love how direct these feel. Gives me confidence in tech climbs and descents! If Aeffect is this good, how much better is Atlas?

Didn't come with a sprocket I was upset when it didn't cause I thought it did. And it was the wrong size so I'm sad

I picked this crank for some simple reasons. it features a 24mm axle and still comes in at very resonable weight penalty while providing enough stiffness. since 24mm diameter bottom brackets bearings are more reliable compared to their 30 mm counterparts I wanted to go back to 24mm. riding it for 2 years now on my RM Slayer I can say this piece to...Read MoreRead more about I picked this crank for some simple

ok some serious hits during regular enduro and bike park missions but also countless hours on hill climbs.
taking into account a rider weight of 88kg
this workhorse performed surprisingly
smooth and without any creaking since it is properly greased and fixed with recommended torque once a year. one thing that needs to be improved is the finish as it started wearing off quite fast. Read LessRead less about I picked this crank for some simple

This crankset is still going after 3yrs and a lot of pedal strikes so can't complain. I definitely had the same creaking problems of the other reviewers, but after taking it apart, cleaning and greasing up the splines I haven't had any issues. There was some corrosion on the non-drive side of the spindle where it contacts the inner bearing race of...Read MoreRead more about This crankset is still going after

the bottom bracket. Not sure if this was moisture ingress or insufficient grease from the bike shop originally, but some metal polish cleaned it up. Also started getting some corrosion on the inside of the spindle which was not great, but a light coating of grease has stopped that for now. Read LessRead less about This crankset is still going after